Characteristics of
Municipal Wastewater

The quality of municipal wastewater is relatively stable, but the water volume fluctuates greatly. Due to the residential water peak period, it is often in the low load operation mode, and some water quality will have low influent COD and insufficient carbon source. In addition, for projects where rainwater and sewage are not diverted, the water volume affected by weather conditions will increase sharply, and the lack of nutrients in the water will lead to sludge loss.

Most of the park’s wastewater is directly discharged by enterprises or reaches the discharge standard after treatment by enterprises. Its quality changes greatly, and the inffluent water volume is greatly affected by the production and drainage cycle of enterprises. In general, there are many refractory substances in the water, the composition is complex, the biodegradability is poor, and the requirements for the impact load resistance of the system are high.

MBR Process Flow Sheet

Process Flow Chart of Wastewater Treatment

An Industrial Park Project in Jiangsu Province

Case Study

Outline of the Facility: 

An industrial park project in Taizhou  with a 4800 ³/ D treatment capacity, which was equipped with a total of 20 groups of PE150II-160-3S membrane modules ,had been working since 2021.

Performance:
The influent COD concentration of the biochemical tank is 100-150mg/l, and the ammonia nitrogen is 15-25mg/l. The sludge concentration of the MBR tank is stable at about 6000-8000mg/l. The effluent COD is less than 50mg/l, and the ammonia nitrogen is less than 5mg/l. Cleaning and maintenance are carried out every 3 months with a stable membrane operation.

PEIER-B-Municipal-Wastewater-Treatment
Some Case Studies Offered: 
● Taizhou project of 4800m³/d in Jiangsu Province(2021)
● Pingyao project of 2000m³/d in Shanxi Province(2020)
● Foxconn project of 3000m³/d in Guangdong Province(2016)
● University of Finance and Economics project of 5000m³/d in Guangdong Province(2017)
● Weigao project of 2000m³/d in Shandong Province(2018)
● Qiandeng project of 6000m³/d in Jiangsu Province(2020)
● Ningnan project of 5000m³/d in Sichuan Province(2020)
● Peking University project of 2500m³/d in Beijing City(2021)

Municipal sewage

In wastewater treatment, PEIER MBR is often a technology of choice over conventional treatment.
In most countries, statutory regulation for discharge and reuse of municipal wastewater are enforced.

Zhengzhou Municipal Government

Angola International Airport Wastewater Treatment

Capacity: 500m³/day

Tianzhou Mountain Scenic Spot in Anhui Province

Capacity: 800m³/day, water reuse for green irrigation.

Zhengzhou Green Expo Park

Shenzhen Foxconn Reuse and Irrigation Project 3000 m3 /d

Shenzhen Foxconn

Capacity: 3000m³/day, for reuse and irrigation purpose.

Wastewater Treatment USA

Capacity: 270m³/day, for reuse and irrigation purpose.

Australia Portable Camps

Capacity: 30m³/day total in 19 Sets for reuse and irrigation purpose.

Zhengzhou Nissan Automobile Painting Wastewater Project2300 m3 /d

Kunming Institute of Metallurgy

Capacity: 5000m³/day.

Kunming Institute of Metallurgy

Capacity: 5000m³/day.

Service Support

“Make good products, sell good products and let customers make good use of products” is the business purpose of the company.

Pre-sale service

Learn More →

After sales service process

Learn More →

Technical video

Learn More →

Peier is the leading flat sheet membrane supplier in China.

“Make good products, sell good products and let customers make good use of products“ is the business purpose of the company.